The DynaFlame is our leading edge product with models ranging from 500,000 BTU to 6 million BTU. All models are available in non-condensing, near-condensing or fully condensing modes. The primary heat exchanger is available in a choice of copper/cu-ni or stainless steel.

Standard Features

• Models range from 500,000 BTU/hr up to 6 million BTU/hr
• Single point input adjustment for controlling air and gas
• 1 to 1 air/gas ratio for perfect modulation throughout
• Advanced digital control system with pin point accuracy
• Proven hot surface ignition with soft start, rumble free operation
• 4-20mA for setpoint or modulation control
• Proven pilot ignition on models 3 million BTU/hr and above
• 0-10 VDC converter (must be specified)
• Lead lag capability up to 8 boilers
• DHW sensor (domestic only) and system sensor (heating only)
• Modbus RTU communication
• Direct ignition up to 2.5 million BTU/hr
• Stainless steel secondary heat exchanger for condensing models

Flow switch, pressure relief valve, low gas pressure switch and flame failure contacts are standard on every DynaFlame